- Community Involvement
The Hydroset II-A Packer is a hydraulic set, mechanically held dual string production packer normally run above a single string hydraulic set or wireline set seal bore packer. Because no tubing manipulation is required to set this packer, the well head can be installed and flanged up before setting.
This packer is available with short string or long string setting capabilities and a variety of tubing connections. This packer is also adaptable for electrical submersible pump applications. This packer features a sequential upper slip release system designed to release each slip individually to reduce the pull required to release the packer. The angles on the upper slips and upper slip body result in the slips releasing smoothly from the casing.
Technical Data for Variations of the Standard Tools Below, Flat Top Versions, J-Latch Versions, Snap Latch Versions, Snap Latch Assemblies
|Casing||Recommended Hole Size (inches)||Tool OD (inches)||Long String||Short String||Part Number||Technical Data|
|Size (inches)||Weight (lbs/ft)||Connections||Min ID (inches)||Connections||Min ID (inches)|
|7||17.0 - 26.0||6.276 - 6.538||6.062||2-7/8 EUE||2.39||1.900 NUE||1.50||94572-BAC-BBA||
Register/Login to see technical data
|26.0 - 32.0||6.094 - 6.276||5.938||2-7/8 EUE||2.39||1.900 NUE||1.50||94570-BAC-BBA|