The DL-CS Anchor is used to anchor downhole equipment from rotating and/or moving up the hole. The anchor is designed to resist up to 12,000 Ft-lbs of torque with a unique cone and slip design while preventing movement up or down hole. It can be set in casing or open hole.
Heavy duty design
Hex mandrel for torque transmission
Adjustable shear set and release
Casing | Recommended Hole Size (inches) | Tool OD (inches) | Thread Connections (Box Up / Pin Down) | Part Number | Technical Data | |
---|---|---|---|---|---|---|
Size (inches) | Weight (lbs/ft) | |||||
5-1/2 | 13.0 - 23.0 | 4.670 - 5.044 | 4.375 | 2-7/8 IF TOOL JOINT / 2-3/8 IF TOOL JOINT | 32255 |
Register/Login to see technical data |
7 | 17.0 - 23.0 | 6.366 - 6.538 | 6.125 | 3-1/2 IF TOOL JOINT / NO THREAD | 32272 |
Register/Login to see technical data |
26.0 - 35.0 | 6.004 - 6.276 | 5.875 | 3-1/2 IF TOOL JOINT / NO THREAD | 32270 |
Register/Login to see technical data |
|
7-5/8 | 24.0 - 39.0 | 6.625 - 7.025 | 6.375 | 3-1/2 IF TOOL JOINT / NO THREAD | 32275 | |
8-5/8 | 24.0 - 40.0 | 7.725 - 8.097 | 7.500 | 3-1/2 IF TOOL JOINT / NO THREAD | 32285 |
Register/Login to see technical data |
4-1/2 IF TOOL JOINT / NO THREAD | 32285-XBEE |
NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.