The CR Bridge Plug provides the end user with tools that will consistently contain well pressures at elevated temperatures and pressures. This plug permits faster removal from the well with either rotary or cable tool methods due to its compact size and the selection of high quality construction material.
The short, compact, interlocked construction assures the user that the CR Bridge Plug will provide faster, safer run-in, dependable set and pack-off and hold pressure that is safe for the casing weight and grade. The interlock construction and compact size requires minimal material removal during drill out. The outside diameter of these products has been held to a minimum to provide maximum tool-to-casing clearance for safe running and maximum fluid by-pass area during displacement procedures even in heavy mud systems.
A Wireline Adapter Kit (WLAK) and Hydraulic Setting Tool are used for setting CR Bridge Plugs.
NOTE: The CR Bridge Plug is designed to provide a temporary wellbore seal. For a permanent wellbore seal, cement must be set on top of the plug.
Technical Data for Variations of the Standard Tools Below
Convertible to Cement Retainer
Sets on wireline or on tubing with mechanical setting tool
Casing | Recommended Hole Size (inches) | Tool OD (inches) | Part Number | Technical Data | |||
---|---|---|---|---|---|---|---|
Size (inches) | Weight (lbs/ft) | Mechanical Set | Wireline Set | Mechanical Set | Wireline Set | ||
4-1/2 | 9.5 - 15.1 | 3.826 - 4.090 | 3.612 | 84245MS | 84245WS |
Register/Login to see technical data |
Register/Login to see technical data |
5 | 11.5 - 18.0 | 4.276 - 4.560 | 3.937 | 84250MS | 84250WS | ||
5-1/2 | 14.0 - 23.0 | 4.670 - 5.012 | 4.315 | 84255MS | 84255WS |
Register/Login to see technical data |
Register/Login to see technical data |
6-5/8 | 17.0 - 32.0 | 5.675 - 6.135 | 5.375 | 84265MS | 84265WS | ||
7 | 17.0 - 35.0 | 6.004 - 6.538 | 5.680 | 84270MS | 84270WS |
Register/Login to see technical data |
Register/Login to see technical data |
7-5/8 | 20.0 - 39.0 | 6.625 - 7.125 | 6.313 | 84275MS | 84275WS | ||
8-5/8 | 24.0 - 52.0 | 7.435 - 8.097 | 7.125 | 84285MS | 84285WS | ||
9-5/8 | 29.3 - 58.4 | 8.435 - 9.063 | 8.125 | 84295MS | 84295WS |
Register/Login to see technical data |
Register/Login to see technical data |
10-3/4 | 32.75 - 60.7 | 9.660 - 10.192 | 9.437 | 84210MS | 84210WS | ||
11-3/4 | 38.0 - 60.0 | 10.772 - 11.150 | 10.437 | 84211MS | 84211WS | ||
13-3/8 | 48.0 - 72.0 | 12.347 - 12.715 | 11.883 | 84213MS | 84213WS |
Register/Login to see technical data |
Register/Login to see technical data |
OPTIONS: MS (Mechanical Set), WS (Wireline Set)
NOTE 1: Conversion Kits are available for converting either way.
NOTE 2: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.
NOTE 3: Not compatible with setting tools from other manufacturers.