The LC Hydraulic Setting Tool (HST) is used to set packers and plugs on tubing that are normally set on wireline. This allows setting in high-angle wells or deviated wells where it is difficult to use wireline equipment. The LC HST allows for packers and plugs to be set with a combination of hydraulic and mechanical forces. This can reduce the setting pressure needed by supplementing the set with tubing tension. A single size LC HST may be used to set a multitude of packer sizes by simply attaching the proper size LC Hydraulic Adapter Kit.
Heavy-duty design
Multiple setting chambers for lower setting pressures
Operable in heavy mud systems
Can be equipped to operate in high temperatures
Circulation through the tool during run in
Setting Tool Size | Setting Area (in2/Cylinder) | Tool OD (inches) | Tool ID (inches) | Thread Connections (Box Up / Pin Down) | Part Number | Technical Data |
---|---|---|---|---|---|---|
LC-15 | 4.70 | 3.718 | 1.50 | 2-7/8 EUE | 39415 |
Register/Login to see technical data |
LC-20 | 4.60 | 4.375 | 2.00 | 3-1/2 IF TOOL JOINT | 39420 |
Register/Login to see technical data |
LC-20HD | 4.60 | 4.375 | 1.75 | 3-1/2 IF TOOL JOINT | 39420HD |
NOTE: All pricing includes standard Nitrile trim. Other sizes and connections available upon request.