The Model “H” Hydraulic Setting Assembly (HST) is a hydraulic setting tool designed for setting packers and plugs without pipe manipulations. It is used to set packers and plugs that are normally set with a Model “E-4” Wireline Pressure Setting Assembly (or similar wireline setting equipment). The same adapter kit that is used on wireline can be used with the Model “H” HST.
The Model “H” HST and packer (or plug) is run in on the tubing to the desired setting depth and a ball is dropped to the HST. Pressure is applied to close the fill ports, which also opens the setting pistons to pressure. As pressure is applied, force is transmitted to the packer (or plug) to set. Tubing tension can also be applied to supplement the setting force generated by the pressure applied.
The standard setting tool comes with three pistons, but additional pistons can be added to reduce setting pressure.
Technical Data for Variations of the Standard Tools Below
Large internal by-pass
Tubing fills automatically as HST is run in the hole
Premature setting is prevented by means of a shear screw in the cross link sleeve
Ported top sub permits circulation through the HST
Use existing wireline adapter kits
Size (inches) | Tool Max PSI | Max Pull (lbs) | Tool OD (inches) | Total Effective Piston Area (in2) | Connection | Part Number | Technical Data | |
---|---|---|---|---|---|---|---|---|
Top | Bottom (Baker E-4) | |||||||
#05 | 10,000 | 31,000 | 1.718 | 1.49 | 1.315 EUE | SIZE 05 | 39105 |
Register/Login to see technical data |
#10 | 10,000 | 75,000 | 2.750 | 10.332 | 1.900 EUE | SIZE 10 | 39110-3 |
Register/Login to see technical data |
6.88 | 1.900 NUE | SIZE 10 | 39110 | |||||
#20 | 6,000 | 120,000 | 3.81 | 13.980 | 2-3/8 EUE | SIZE 20 | 39120-2 | |
4,000 | 120,000 | 3.81 | 20.940 | 2-3/8 EUE | SIZE 20 | 39120-3 |
Register/Login to see technical data |
NOTE: All pricing includes standard Nitrile trim. Other sizes, connections, and rubber options available upon request.